메인으로
모바일 메뉴 버튼모바일 메뉴 닫기 버튼

NEO MONITORS

측정방식:

  • Diode Laser를 이용한 IR 대역의 in-situ방식
  • TDLAS(Tuneable Diode Laser Absorption Spectroscopy)
  • NOx, NH3, O2 탈질 설비 제어
  • HCI, H₂S 소각로 / 매립지
  • O2 정유사 "SAR" 프로세스의 제어
  • H₂O CEMS용 모니터링
  • O2 폭발 위험 프로세스의 폭발 하한치 제어
  • CO, CO₂, O2 정유사 RFCC 프로세스의 모니터링
  • CO, O2 보일러, 연소제어, 정유 공장의 히터, 제철공장의 퍼네스 등의 연소제어
  • Dust: Scattered/Transmission mode로 근거리(0.5~3m)에서 원거리(~10m)까지 측정
제품특징

• NEO Monitors의 LaserGas™ III SP 가스 분석기는 광학 기반의 Laser TDLAS 방식으로 인증 받아, 특별히 위험 지역에서 작동되도록 설계되었으며 SIL2 시설에서도 단독으로 사용 가능한 제품입니다. 스택(Stack)이나 덕트(Duct) 또는 파이프(Pipe) 및 반응기 본체(Reactor vessel)가 있는 현장에서 분석기의 송신기와 수신기를 서로 마주보도록 설치되므로 번거로운 샘플링 장치가 필요하지 않습니다. 이 분석기는 주변 가스에 대한 교차 간섭 없이 온라인 분석을 신속하게 제공합니다.
 

 
주요 특징

  • Zone 1 (방폭 Ex-d)
  • SIL2 인증
  • 컴팩트한 사이즈
  • 지속적인 자동 상태 체크
  • 15W 이하의 낮은 소비 전력
  • Zero drift 없음
  • 공장 출하 시 교정(Calibration) 완료
  • 주변 가스의 간섭 현상 없음
  • Laser TDLAS 측정 기술
 

 
적용 사례
 
  • 공정 안정성
  • 비활성화 제어
  • FCCU
  • 코크 오븐 가스
  • 연소 제어
  • 선택적 촉매 환원(SCR)
  • 선택적 비촉매 환원(SNCR)
  • 탈질 (DeNOx)
  • 대기 배출 모니터링

 
주요 장점
 
  • 비접촉식 광학 레이저 측정 기술
  • 측정 중 상호 간섭 없음
  • 높은 측정 신뢰도
  • 저비용 고수익 투자(ROI)
  • 낮은 유지보수 비용
상세정보
• SPECIFICATIONS
  - Response time: 1 second or longer
  - Precision (Repeatability): +/- LDL or 1% of reading, which ever is greater
  - Linearity: 1% rel.
 
• ENVIRONMENTAL CONDITIONS
  - Operating temperatures(ATEX): -40 °C to +65 °C
  - Operating temperatures(CSA): -40 °C to +60 °C
  - Storage temperatures: -40 °C to +70 °C
  - Protection classification: IP65
 
• INPUT / OUTPUT
  - Analog output(3): 4 - 20 mA current loop(concentration and transmission)
  - Digital output: 10/100 Base T Ethernet (Modbus/TCP)
  - Relay output: High gas, warning/fault (normally closed)
  - Analog input: 4 - 20 mA Process temperature and pressure reading
 
• RATINGS
  - Power supply: 18 - 32 VDC)
  - CSA rating: Class 2 supply
  - Power consumptions: max 20W
  - 4 - 20 mA: 500 Ohm max. load impedence, not isolated
  - Relay output: 1 A at 30 VDC
 
• SAFETY
  - Laser class: Class 1M according to IEC 60825-1, eye safe
  - CE: Certified
  - EMC: Conformant with directive 2014/30/EU
 
• APPROVALS
  - ATEX zone 1: Ex db [op is Ga] IIC T4 Gb, Ex tb [op is Da] IIIC T100 °C Db
  - CSA: Class I Div.2, Groups B, C and D; T4
  - ATEX rating connetion box: II 2 GD Ex e IIC T5
                                        II 2 D Ex e tb IIIC T85°C Db
 
  - Functional safety: IEC 61508 certified
                            SIL2 capability
 
• INSTALLATION AND OPERATION
  - Flange dimension:
      DN 50/PN 10 or ANSI 2"/150lbs(other dimenstions on request)
  - Alignment tolerances: Flanges parallel within 1.5°
  - Purging of windows: Dry and oil-free pressurised air or nitrogen
  - Purge flow: 10-50l/min(application dependent)
 
• MAINTENANCE
  - Calibration: Check recommended every 12 months
 
• DIMENSIONS / WEIGHT
  - Transmitter and receiver unit(TU/RU): 215mm(length, add 50mm for purge unit) x 125mm(diameter), 3.5kg each
  - Window unit(optional): Wu 60(length), Wu 100(length)
  - TU/RU connection box: 260mm x 160mm x 90mm, 2.5kg
 

 

Gas
Detection limit
(LDL)
Min
process Temp
 
Max
process Temp    
Min
process pressure
Max
process pressure
Min Range
Max
Range
Default Range
O2 100ppm -40℃ 1500℃ 0.7BarA 10BarA - 0-100% -
CO(Process temp<500℃) 0.5ppm -40℃ 500℃ 0.7BarA 1.5BarA 0-50ppm 0-10000ppm*m -
CH4 add-on 0.01% -40℃ 500℃ 0.7BarA 1.5BarA 0.1%*m 0-10%*m -
CO(Process temp>500℃) 3ppm -40℃ 1300℃ 0.7BarA 1.5BarA 0-200ppm 0-20000ppm*m -
CH4 add-on 0.05% 500℃ 1300℃ 0.7BarA 1.5BarA 0-5%*m 0-10%*m -
H2O add-on 2% 500℃ 1300℃ 0.7BarA 1.5BarA - 0-40% 0-40%
NH3 0.2ppm -40℃ 500℃ 0.7BarA 1.5BarA On request On request 0-50ppm
optional H2O tbc -40℃ 500℃ 0.7BarA 1.5BarA - 40% 0-40%
H2 0.1% vol -50℃ 250℃ 0.5BarA 10BarA 5% 100% -
CO2 10ppm -40℃ 1300℃ 0.7BarA 1.5BarA 0-100ppm 0-10%*m -